The stereolithography printer can achieve details as fine as 10 microns in size The makers of a 3D desktop printer that’s garnering attention as a Kickstarter crowdfunding project claim the machine is 50 times faster than other 3D desktop printers. The Slash 3D printer is a stereolithography (SLA) machine, meaning it uses a basin filled with photosensitive resin that’s hardened into shapes layer by layer using a concentrated light source. The 3D printer, from startup Uniz Technology LLC in San Diego, is available for $1,200 to Early Bird backers. At that price, the Slash 3D printer is the least expensive SLA machine available — even cheaper than XYZprinting’s Nobel 1.0, which retails for $1,500. XYZprinting has made its bones in the 3D printer market by offering inexpensive da Vinci 3D machines; more than one of its fused-filament fabrication 3D printers retail for under $500. Another popular SLA 3D printer that got a start on Kickstarter, Formlabs’ Form 1+, retails for $2,800. Formlabs also sells a new Form 2 3D printer for $3,500. With the lowest price and reported fastest speeds, the Slash 3D printer has would-be buyers flocking to the Kickstarter project; so far, the crowdsourcing campaign has garnered more than $200,000, four times its original $50,000 goal. And, it still has 21 days to go. Uniz Technology A section of an Eiffel Tower model demonstrates the pinpoint accuracy the Slash 3D printer is capable of producing. The Slash 3D printer can build a simple two centimeter-diameter tube at the rate of 10 centimeters in 2.5 minutes — 240 centimeters an hour, according to Uniz Technology CEO Houmin Li. The Formlabs Form 2 SLA printer has a build speed of 1 to 3 cm/hr when printing at 100-micron layer thickness. For example, a chess rook takes around one and a half hours to print at the 100 micron layer-height. Another way to measure the Slash 3D printer’s speed is by the cubic centimeters of light-cured resin it uses per hour (cc/hr). Uniz Technology claims its printer is capable of hardening 1,000 cc/hr. By comparison, the Form 2 3D printer can use 19 cc/hr. An industrial SLA 3D printer, such as the Carbon3D M1 machine, can harden up to 60 cc/hr. Of course, the Carbon3D M1 has a price tag of around $144,000. Uniz Technology claims it overcame a speed barrier with its Slash SLA 3D printer by using a liquid crystal diode (LCD) to harden the photosensitive resin. Then, a liquid cooling coil below the nonstick surface that separates the printed layer from the bottom of the resin vat, keeps it from overheating material during its print cycle. Uniz Technology The Slash 3D printer uses an LCD light source to harden photosensitive resin; a liquid cooling coil below the nonstick surface that separates the printed layer from the bottom of the resin vat keeps it from overheating material during its print cycle. As other SLA printers have attempted to improve on print speeds, they have superheated the nonstick layer to 500 to 600 degrees Fahrenheit, damaging the material, according to Houmin. “Before Slash, speeds of 1,000 cc/hr were only achievable with large industrial machines that cost over $100,000; now it can be available in your home,” Uniz Technology boasts. Uniz Technology A number of objects printed by the Slash SLA 3D printer. Like the Form 2 SLA printer, the Slash uses resin cartridges that automatically refill the machine’s tank during the printing process. As a rule, SLA 3D printers offer far greater resolution (the smoothness and detail of a printed object’s surface) than fused-filament fabrication 3D printers, which extrude layer upon layer of thermoplastic to create an object. All FFF printers leave a course- to fine-ribbed surface on printed objects. SLA printers, however, are capable of printing a virtually smooth surface, with finer print layers. The Slash 3D printer offers layer thicknesses of 300, 200, 100, 50, 25 and 10 microns in size (a micron is 1,000 of a millimeter). The Uniz slicer software, which allows users to import and prepare files for printing, can even define different Z resolutions, so that one layer can be thicker or thinner than another. The Slash 3D printer has a build area of 7.5-in x 4.8-in x 7.8-in. By Comparison, the Formlabs Form 2 SLA 3D printer offers a layer thicknesses that range from 25 to 100 microns; it has a build volume (or area) of 5.7-in x 5.7-in x 6.9-in. The Slash 3D printer is scheduled to begin shipping to early customers in December. Related content news analysis Apple earnings: About that iPhone 'slump' in China Based on information from Thursday's earnings report, it seems that data pointing to an iPhone slump in China were over-baked. By Jonny Evans May 03, 2024 9 mins iMac iPhone Apple news Microsoft begins to phase out ‘classic’ Teams Microsoft is encouraging Teams customers to move to the new, faster version of the collaboration app; the older version will be switched off next year. By Matthew Finnegan May 03, 2024 3 mins Microsoft Teams Collaboration Software Productivity Software news analysis Apple confirms it will open up the iPad in Europe this fall The latest efforts to comply with Europe’s Digital Markets Act mean developers can offer to side load apps to both iPhones and iPads in the EU. Apple has also taken steps to improve what it offers to smaller and non-commercial developers in the By Jonny Evans May 02, 2024 6 mins iPad Apple Mobile Apps news Udacity offers laid-off US workers free access to its courses for 30 days Sign-ups will be available over the next 30 days By Lucas Mearian May 02, 2024 4 mins Technology Industry IT Jobs IT Skills Podcasts Videos Resources Events SUBSCRIBE TO OUR NEWSLETTER From our editors straight to your inbox Get started by entering your email address below. Please enter a valid email address Subscribe